DIAMOND MONITOR LOUDSPEAKERS
DIAMOND MONITOR LOUDSPEAKERS
Diamond Monitor Loudspeakers by Pylon Audio
Diamond Line is the design in which well-known and widely appreciated 19 mm Scan Speak textile dome was used, while the mid’s and the down’s of the band were entrusted with a pair of 18cm drivers made by Norwegian Seas. By optimizing the selection of the tweeter drivers we have obtained sophisticated sustain of high frequencies, while mid-woofers, with light cellulose cone allow for a lot of flexibility in the division of the band in the midrange. The whole results is a dynamic, coherent and retail nature of the presentation that is differentiating recordings well.
By a slight inclination of the design the desired visual effect was achieved, and it was combined with the optimization of the dependence phase that occur between the loudspeakers. The crossover is mounted on direct mounting technique, it uses only polypropylene capacitors. Placement of coils is optimized to minimize the interference.
Loudspeakers enclosures are made of solid MDF boards, which additionally were strengthened with inner rim. To suppress the sound bitumen mats and sheep'snwool were applied. The loudspeaker was set on a pedestal, which in addition to providing aesthetic impressions, provides an anti-vibration platform for the loudspeakers set.
Impedance: 8 Ohm
Bandwidth: 38Hz - 20kHz
Nominal power: 80 W
Maximum power: 160 W
Efficiency: 88 dB
Dimensions [W x H x D]: 196 x 420 x 315 mm
Weight: 10 kg (piece)
Woofer: Pylon Audio PSW 18.8.CA (Seas CA18RLY)
Tweeter: Pylon Audio PST 19.T (Scan Speak D2010/851300)
Spikes + stand: YES
Speaker grille: YES
Warranty: 4 years
Available finish options:
- Natural veneer oak, ennobled with the oil wax: 11 decors
- Natural veneer oak + lacquer: wenge, black, walnut, cherry, natural
- High gloss: white, black
- Mat: white, black
- We can realize individual orders with RAL colours
Diamond Monitor - 2-way design based on the 19mm Scan Speak textile dome, characterized by spatial and retail sound. The bottom of the band is reproduced by the 18cm Norwegian Seas driver, that is offering colourful sounding well known from the other Diamond designs. This loudspeaker was modified by adding an additional magnetic ring that optimized Thiele-Small parameters for the needs of the application inserted in the mount-enclosures.
Diamond Monitor offers dynamic and spatial sound. Thanks to the optimization of the magnetic system, the speakers have a strong and well-articulated bass. The midrange tones of the set are a representation of precision and resolution, vocals and acoustic instruments are stable in a space filled with a great deal of information.
The steering in the monitors is mounted in the direct-mount technology, using only polypropylene capacitors. The placement of the coils have been optimized for minimizing interactions.
The loudspeaker enclosures are made in the same technology as in case of their larger brothers, Diamond 28 and 25. The solid is based on MDF boards, bituminous mats and sheep wool were being used for the dampening. The whole structure was stiffen with additional reinforcement. Through a slight tilt of the structure, the intended visual effect was combined with the optimization of the phase dependencies between the speakers.
The columns are dedicated to the rooms of 12 - 25 m2.
The sets are provided with the branded stands that create an attractive proposition for people who would like to use the full potential of the columns in their spatial capabilities.
AVAILABLE FINISH OPTIONS