DIAMOND 28 LOUDSPEAKERS

DIAMOND 28 LOUDSPEAKERS

from 2,225.00

Diamond 28 Loudspeakers by Pylon Audio

Diamond Line is the design in which well-known and widely appreciated 19 mm Scan Speak textile dome was used, while the mid’s and the down’s of the band were entrusted with a pair of 18cm drivers made by Norwegian Seas.

By optimizing the selection of the tweeter drivers we have obtained sophisticated sustain of high frequencies, while mid-woofers, with light cellulose cone allow for a lot of flexibility in the division of the band in the midrange. The whole results is a dynamic, coherent and retail nature of the presentation that is differentiating recordings well.

By a slight inclination of the design the desired visual effect was achieved, and it was combined with the optimization of the dependence phase that occur between theloudspeakers. The crossover is mounted on direct mounting technique, it uses only polypropylene capacitors. Placement of coils is optimized to minimize theinterference.

Loudspeakers enclosures are made of solid MDF boards, which additionally were strengthened with inner rim. To suppress the sound bitumen mats and sheep'swool were applied. The loudspeaker was set on a pedestal, which in addition to providing aesthetic impressions, provides an anti-vibration platform for theloudspeakers set.

TECHNICAL DETAILS:

Impedance: 4 Ohm
Bandwidth: 36 Hz - 20 kHz
Nominal power: 120 W
Maximum power: 250 W
Efficiency: 90 dB
Dimensions: [W x H x D] 196 x 1040 x 370 mm
Weight: 25 kg / piece
Woofer: 2 x Pylon Audio PSW 18.8.CA (2xSeas CA18RLY)
Tweeter: Pylon Audio PST 19.T (Scan Speak D2010/851300)
Spikes + stand: Yes
Speaker grille: Yes, magnetic
Warranty: 4 years

Available finish options:

- Natural veneer OAK, ennobled with the oil-wax - 11 decors. 
- Natural veneer OAK, colourless lacquer: wenge, black, walnut, cherry, natural. 
- High Gloss: white HG, black HG.
- Lacquer Mat - white, black. 
- We can customize individual orders with RAL colours.

Finish:
Quantity:
Add To Cart

PRODUCT DESCRIPTION:

In the 2,5 - way design well known and widely appreciated 19mm Scan Speak textile dome was used, while the mid’s and the down’s of the band entrusted with a pair of 18cm transducers made by Norwegian Seas. By optimizing the selection of the tweeters transducers we have obtained sophisticated sustain of high frequencies, while mid-woofers, with light cellulose membrane allow for a lot of flexibility division band in the midrange. The whole results in a dynamic, coherent and retail nature of the presentation that is differentiating recordings well.
By a slight inclination of the design the desired visual effect was achieved, and it was combined with the optimization of the dependence phase that occur between the loudspeakers. In Diamond 28 the steering is mounted on technique direct mounting, it uses only polypropylene capacitors. Placement of coils is optimized to minimize interference. 

Loudspeakers enclosures are made of solid MDF, which additionaly were strengthened with inner rim. To suppress the sound bitumen mats and sheep's wool were applied. The loudspeaker was set on a pedestal, which in addition to providing aesthetic impressions, provides an anti-vibration platform for the loudspeakerspeakers set.

Diamond 28 is the unique combination of natural sounding with the look of the design.

The columns are dedicated for use in rooms with a floor area from 25 to 45 m2.

FINISH OPTIONS